BL400VTE
BL400VTE Automatic labeller for self adhesive vignette & TE-seals
The Marchesini Neri BL400VTE is an automatic continuous motion labeller, suitable to apply at high production speeds one(1) self-adhesive VIGNETTE on the upper carton face and TWO self-adhesive TAMPER-EVIDENT SEALS on the closure points of formed cartons straight or reverse tuck-in flaps. Conveyance system by toothed belt; unit operating in line with other machines.
Machine suitable for the installation of:
- ink jet or Laser printing system on the upper face and/or on both sides of cartons for printing of readable data as well as corresponding 2D code (Datamatrix);
- relevant camera controls.
Standard Equipment
- Twin horizontal flat conveyor belts, allowing carton accumulation at in-feed.
- Minimum load control at machine infeed with automatic start.
- Timing and distancing device (patented), servo driven, to dispense the cartons onto main toothed conveyor.
- Twin horizontal conveyor toothed belts with adjustable width in order to handle different carton sizes.
- Positive conveyance system. Cartons are kept in pitch, pushed by the vertical cleated belt.
- Continuous mode speed adjustment.
- Automatic working speed synchronization of motors.
- Top belt to hold the seal during placement over the edges.
- Control of pulling motion, of label carrier web.
- End of reel control with machine stop.
- Missing label control on reel.
- Vertical and horizontal adjustment of the TE-SEAL and VIGNETTE position.
- VIGNETTE smoothing system with brushes or rubber rollers.
- TE-SEALS smoothing system with folding devices.
- Folders for straight or reverse tuck-in cartons.
- TE-SEALS and VIGNETTE carrier web rewinding units.
- Regulation of overprint zone on VIGNETTE.
- Maximum load control at the out feed with automatic start.
- Dispensed labels counter.
- All reel holder’s operator side.
- Extracted reel control with alarm.
- Carton reject at discharge and collation in bin on operator side.
- Control rejection bin in position with alarm.
- Tamper Evident internal seals extractable reel, allowing for an easy change.
Machine complete with:
- Power at 400 Volt, 3 phases, 50 Hertz, Ground & Neutral wiring.
- Electric cabinet on board.
- SIEMENS PLC.
- • Operator terminal SIEMENS Touch Screen with video colour
- Safety Guards in aluminum and Methacrylate. Schmersal type safety switches.
- Machine stop in case a door opens.
- Compressed air control pressure-switch. With machine stop at low-level detection.
- Outfeed carton counter.
- Rejected carton counter.
- Work hour counter.
- The machine has all safeties, required for a safe operation and corresponds to norms.
- Delivered with CE mark.
Changeover is made without additional size parts as only some adjustments are sufficient.
Technical data
Production speed
- up to 400 pieces/minute
Carton size
- The indicated data are for reference only. They are subject to be modified whenever manufacturing needs dictate so.
- A: Min 20 mm – Max 120 mm
- B: Min 15 mm – Max 90 mm
- H: Min 70 mm – Max 250 mm
Labels
- Height B: Min 20 mm – Max 60 mm
- Length A: Min 15 mm – Max 80 mm
Seals
- Height B: Min 15 mm – Max 30 mm
- Length A: Min 15 mm – Max 60 mm
Label production speed
- From 0 to 60 Meters/Minute
Reel diameter
- Max 400 mm
Reel core diameter
- 45 or 75 mm
Technical documentation
- Standard CE Instructions Manual and CE Certificate are supplied with the machine.
Commercial References
Gianluca Cavalli - Mirko Malatrasi Sales Managers
Ph. +39 349 392 0666 | +39 342 127 8487
Direct ph. +39 051 0116 303 | +39 051 0116 307
E-mail [email protected]
Ugo Bartolomei Sales & Business Development Manager
Ph. +39 342 778 6619
Direct ph. +39 051 0116 333
E-mail [email protected]
Contact Form